Aposonic A-S0804R3 Manuel d'utilisateur

H.264 Hardware Codec 4/8 Ch Network Digital Video Recorder

10 2.2 8 CH FRONT PANEL DVR OPERATION NO. LABEL OPERATION PTZ 1 Power Power LED 2 HDD HDD LED 3 IR Sensor For Remote Control. 4 REC Press t

11 2.3 4CH BACK PANEL NO. LABEL OPERATION 1 VIDEO OUTPUT Video output with BNC connector. 2 VIDEO INPUT Video input with BNC connector. 3 MONITOR O

12 2.4 8CH BACK PANEL NO. LABEL OPERATION 1 VIDEO OUTPUT Video output with BNC connector. 2 MONITOR OUT Video output with BNC and S-Video connect

13 PTZ : When camera supported PTZ function, user can use “PTZ” button, located on the front panel, to perform PTZ function. Press ▲▼◄► to select and

14 Terminal Connectors: EXAMPLE 1：Connect Alarm In One with PIR (Passive Infrared). EXAMPLE 2：Connect with Alarm Siren at Relay N.O. T+ RS-485

15 2.8 IR REMOTE CONTROL ITEM AUTO Press AUTO to switch channel by channel automatically. SEL Press this button to select the different assembled o

16 2.7 PTZ (PAN, TILT AND ZOOM) CAMERA Following diagram for DVR connect between PTZ camera & joystick controller, for DVR to control PTZ camera

17 3 SYSTEM SETUP 3.1 MENU SETUP INTERFACE(GUI) A. CAMERA SET B. MOTION SETUP C. RECORD SETUP D. LARM SET

18

19 3.2 LIVE VIEWING AND POP-UP MENU Live NOTE：The pop-up menu can be activated by moving the mouse cruise to t

2INSTRUCTION MANUAL To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and completel

20 ZOOM Key again can disable digital zoom function. Using the panel key to perform zoom in function is fixed at 2 times.) D. PTZ CONTROLLER Within l

21 PTZ CONTROL , , , Direction key / Zoom In (“ ” Key)/ Out key (“ ” Key) PTZ SETUP MENU Under PTZ control mode,

22 LEFT-RIGHT SPEED: Use the mouse wheel to change the left-right speed. UP-DOWN SPEED: Use the mouse wheel to change the up-down speed. AUTO SPEED: U

23 B-1. CONTRAST Press ◄ or ►/ mouse wheel to change contrast level.

24 B-2. BRIGHTNESS Press ◄ or ►/ mouse wheel to change brightness level. B-3. HUE Press ◄ or ►/ mouse wheel to change HUE level. B-4. COLOR Press ◄ o

25 3.4 MOTION SETUP A. CAMERA Press ◄ or ►/ mouse wheel to switch channels. B. MOTION DETECT Press ◄ or ►/ mouse wheel to change value for motion

26 3. Left-Click the mouse to see more options or exit the setup. 3.5 RECORD SETUP A. RESOULTION Press ◄ or ►/ mouse wheel to switch record

27 B. NORMAL RECORD IPS Press SET to change the IPS in normal recording. User can click “AVERAGE” to set IPS automatically by system or change the IPS

28 D. ALARM RECORD DURATION Press ◄ or ► to set dwell time of alarm recording. E. RECORD QUALITY Press SET to switch image quality of each channel (72

29 3.6 ALARM SETUP Press ▲ or ▼ to select items. Press ◄ or ► to change values. Press SET to see more options. A. EXT. ALARM MODE Select

3INSTRUCTION MANUAL To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and completel

30 C. HDD INFORMATION Press SET to display HDD information. D. HDD FORMAT SETUP D-1. HDD PASSWORD PROTECT Press ◄ or ►/ mouse wheel to change value

31 3.8 NETWORK SETUP Press ▲ or ▼ to select items. Press ◄ or ► to change values. Press SET to see more options. A. IP MODE Press ▲ or ▼ t

32 H-4. STATE Press SET to display status of PPPoE。 I. DDNS SETUP I-1. DDNS SETTING：Press◄ or ►/ mouse wheel to set DDNS ENABLE / DISABLE. I-2. PRO

33 3.9 BACKUP SETUP NOTE: *For function stability, Ethernet remote control function (IE) will be stopped when processing backup function. *USB D

34 z User can use the mouse wheel to change the backup Start/ End time。 z Click to start backup, the total process will be shown on screen.

35 3.10 SYSTEM SETUP A. DATE / TIME SETUP Press SET to set DATE / TIME. A-1. TIME Use mouse wheel to change DATE/ TIME. A-2. DATE FORMAT Us

36 Press ◄ or ►/ mouse wheel to change values. ID NUMBER is required to make difference of each DVR. E. DISPLAY SETUP Press SET to ENABLE or DISABLE d

37 J-1. MANUAL MODE Use SET to change the Day Light Saving start and end time. Press ◄ or ►/ mouse wheel to change DELAY TIME J-2. AUTO MODE P

38 4 DVR PLAYBACK Click the playback button on the pop-up menu. Note: the pop-up menu can be activated by moving the mouse cruise to the

39 4.1 TIME SEARCH Double click Left button of mouse to trigger play time search. Please set the start and end time to search.

4TABLE OF CONTENTS 1 INTRODUCTION ...

40 Please select the event to playback. NOTE: Display the type of the event as follows. POWER If the DVR got power loss, it wil

41 5 BACKUP PLAYBACK SYSTEM REQUIREMENT CPU: Intel Celeron 1.6G MEMORY: 256MB. VGA: 32MB VGA RESOLUTION: 1024 x 768. OS: Windows XP / 2000 SUGGESTE

42 B. HDD PLAY Play about all the data from the Hard disk of DVR or perform the specific Time and Event Search to play. Note: Unload the DVR HDD fir

43 B-2. EVENT SEARCH It will display all the events which are reserved within the DVR HDD after press (Shown in the following) and double click lef

44 Finally, the complete information will pop-up while finished storage. (R6 Viewer.exe) can play not only DVR H.D.D. but also the *.264 and

45 5.2 USB & LOCAL BACKUP FILE PLAYBACK A. Plug the USB disk into PC or check the local backup folder. If using USB mode, please double click

46 C. Open the USB disk located driver letter. (Example E:) or the local backup folder, and pick the file to playback. The backup file will named as

47 5.3 BACKUP FILE TO AVI A. Please select specific channel to backup. B. During video playback mode please press AVI bottom to start. C

48 6 NETWORK VIEWING & PLAYBACK SYSTEM REQUIREMENT CPU: Intel Celeron 1.6G MEMORY: 256MB. VGA: 32MB VGA RESOLUTION: 1024 x 768. OS: Windows XP /

49 NOTE: Please input correct network parameters without blank spaces. On Device Lists, it lists all servers. Click on one server and then its IP set

57. 3GPP APPLICATION & SETTING ...65 APPENDIX A: RECORDING TIM

50 5 Above three options are all based on select as the prompt. As indicated in the dialogue box. Please select "YES." OPTION

51

52 6.3 LOGIN A. INSTALL ACTIVEX B. ACCOUNT & PASSWORD LOGIN After IP setup and connect to network or LAN, type IP address on IE Browse

53 6.4 REMOTE CONTROL LIVE VIEWING A. DVR Configuration Get into DVR network menu. B. SCREEN FORMAT Switch screen format and click twi

54 PLAYBACK by TIME SEARCH & EVENT SEARCH Playback Time Search Time Event SearchHDD Select Ex. HDD1 or HDD2

55 A. HDD Select User can select HDD1 or HDD2 for playback B. Playback Time User can select the time then press “Time Search” for playback. C. Time

56 OTHER FUNCTIONS User can use other functions by clicking the left of mouse A. Snapshot: User can save any single picture from image. B.

57 6.5 CONFIGURE A. System - System Information A-1 SYSTEM INFORMATION SERVER NAME: This name will show on the IP Installer. LANUGAGE：There are Eng

58 User Management provides 3 levels of limits of authority: Administrator (the highest), User, and Guest. Administrator: Possessing the highest leve

59 D. NETWORK – IP SETTING D-1 IP ASSIGNMENT DHCP: In Dynamic Host Configuration Protocol (DHCP) mode, DHCP server will get setting done automa

6 1 INTRODUCTION 1.1 FEATURE ¾ H.264 hardware-based codec ¾ Triplex Function (Simultaneously playback, record and remote viewer) ¾ Adjustable re

60 With IP Share (Router), the following Ports needed to be adjusted in case of conflict. E. NETWORK – PPPoE E-1 PPPoE SETTING Click on Enabled

61 F. NETWORK / DDNS SETTING Click on Enabled to enable DDNS function. F-1 DYNDNS.ORG DDNS SETTING - DYNDNS.ORG PROVIDER: Select dyndns.org HOST

62 http://<username>.ddns.camddns.com: Registered successfully. 4. Updating Failed, the name is already registered. 5. Updating Failed,

63 Click on “Motion” or “Alarm” option to enable Mail Setting and FTP Setting function. Mail Server: The IP address of Mail Server (i.e. mail.hunte

64 I. OTHERS / RTSP User can click Video Quality drop down list to change the video quality. There are Best, High, Standard, Medium and Low options.

65 7. 3GPP APPLICATION & SETTING 3GPP (also known as 3rd Generation Partnership Project) is a corporation which formulate 3rd-generation communi

66 7. “Connected to media server” will appear 8. Success with vivid image * 1. 3GPP BANDWIDTH: Minimum 30kbit /sec. per channel. 2. CONNECTION NUM

67 APPENDIX A: RECORDING TIME LAPSE (HOURS) Half D1- 720x240 160 GB Hard Disk

68 400 GB Hard Disk Unit: HourPICTURE QUALITY (KB) LOW MEDIUM HIGH BEST simple complex average simple complex av

69 1T Hard Disk Unit: Hour PICTURE QUALITY (KB) LOW MEDIUM HIGH BEST simple complex average simple complex a

7 Recording Rate (CIF) NTSC: 360*240 up to 120 PAL: 360*288 up to 100 NTSC: 360*240 up to 240 PAL: 360*288 up to 200 Recording Mode Emergency (Man

70 250 GB Hard Disk Unit: HourPICTURE QUALITY (KB) LOW MEDIUM HIGH BEST simple complex average simple complex ave

71 750 GB Hard Disk Unit: HourPICTURE QUALITY (KB) LOW MEDIUM HIGH BEST simple complex average simple complex ave

72 APPENDIX B: HDD COMPATIBLE TABLE * Please use SATA I Hard Disk and setup the Jumper Block to 1.5 Gb/s Operation. As the following ima

73 APPENDIX C: ERROR MESSAGE LIST ERROR MESSAGE ERROR STATUS & REASON NOTEDISK ACCESS ERROR! H.D.D. Data structure Un-normal. Data does not r

8 OTHER Dimensions (W x H x D) 280 x 260 x 80 mm Unit Weight 1.8 kg (without HDD) Operating Temperature 0 ~ 45 ℃ Operating Humidity 0 ~ 90% Power

9 2 HARDWARE OVERVIEW 2.1 4CH FRONT PANEL DVR OPERATION NO. LABEL OPERATION PTZ 1 Power Power LED 2 HDD HDD LED 3 IR Sensor For Remote Contr