USER MANUAL 04 CHANNELS DIGITAL VIDEO RECORDER INSTRUCTION MANUAL To obtain the best performance and ensure device fu
11 Terminal Connectors: EXAMPLE 1:Connect Alarm In One with PIR (Passive Infrared). EXAMPLE 2:Connect with Alarm Siren at Relay N.O.
12 2.4 IR REMOTE CONTROL ITEM REC Press REC to start recording and press twice to stop. 1 - 4 Select channel 1-4 with full screen. QU
13 2.6 PTZ (PAN, TILT AND ZOOM) CAMERA Following diagram for DVR connect between PTZ camera & joystick controller, for DVR to control PTZ ca
14 3 SYSTEM SETUP 3.1 MENU SETUP INTERFACE(GUI) A. CAMERA SET UP B. RECORD SETUP
15 E. AUTHORITY SETUP F. HDD MANAGEMENT G. SYSTEM SETUP
16 3.2 LIVE VIEWING AND POP-UP MENU NOTE::::The pop-up menu can be activated by moving the mouse cruise to the bottom of the live viewing screen.
17 SPEED DOME CONTROL Direction key Preset Point Preset Point Patrol Autopan Stop auto patrol PTZ setup menu Minimize the Speed Dome Co
18 PTZ SETUP MENU PROTOCOL: Use drop down list to change the connection protocol. BAUD RATE: Use drop down list to change the BAUD rate. ID: Use
19 A. CAMERA SETUP A-1. DISPLAY Use the mouse to enable or disable the camera display. A-2. TITLE Press the mouse to change the na
20 B-1. ENABLE Use the mouse to enable or disable motion function. B-2. SENSITIVITY Press ◄ or ► to change sensitivity level. B-3. RELAY DWELL Press
2 FCC Compliance USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED EQUIPMENT COULD BE VOIDED IF YOU MAKE CHANGES OR MODI
21 chosen. Moreover, Click can setup the “Shield” area. C-2. MASK Enable or disable “Mask” function (Live Image and Playback Mask). Click to se
22 3.4 RECORD SETUP A. AUDIO RECORD Use the mouse to enable or disable the audio record function. B. POST-ALARM RECORDING TIME Press ◄ or ► to c
23 D-2. ALARM RECORD SETUP Among alarm record tag, the resolution setting is the same as normal record setup. User can adjust the q
24 3.5 ALARM SETUP A. ALARM TRIGGER SETUP A-1. HDD TEMP. WARNING Enable or disable the hard disk over-heated warning function. A-2. HDD TEM
25 B. ALARM OUTPUT SETUP Press ◄ or ► to setup buzzer and relay time. B-1. BUZZER TIME Use ◄ or ► to setup the external alarm buzzer time. The value
26 3.6 NETWORK SETUP A. IP ADDRESS SETUP Press ◄ or ► to DVR IP address. A-1. IP MODE Press drop down list to change IP mode to STATIC IP or DHCP
27 B. PPPoE SETUP B-1. PPPoE Setting Press the drop down list to enable or disable PPPoE. B-2. User Name Insert the user name (ADSL account) which pr
28 D. DDNS SETUP D-1. DDNS Enable Click the checkbox to enable or disable DDNS function. D-2. Provider Click the drop down list to select DDNS provid
29 E. MAIL SETUP E-1. Trigger Mode Click the checkbox to select the trigger mode. There are alarm and motion two modes. E-2. Mail Server The IP addre
30 F. FTP SETUP F-1. Trigger Mode Use the checkbox to select the trigger modes which are alarm and motion options. F-2. FTP Server The IP address of
3TABLE OF CONTENTS 1 INTRODUCTION ... 4 1
31 3.7 AUTHORITY A. HDD Format Check User Password Use the mouse to click the checkbox to enable or disable inserting the user password while p
32 3.8 HDD MANAGEMENT A. OVERWRITE MODE Click the drop down list to enable or disable overwrite function. B. HARD DISK FULL WARNING Click the dr
33 3.9 SYSTEM SETUP A. Software Update Click button to perform firmware updating. Click to start software update. B. Configure
34 C. Time Setup Click button within “Time” block can adjust and synchronize the time of the dvr as the system time of the PC. Moreover, if the us
35 F. System Information F-1. DVR Name Use the virtual keyboard to insert the name of the DVR. F-2. DVR ID Use ◄ or ► to setup the DVR ID. The adjust
36 4 DVR PLAYBACK Click the playback button on the pop-up menu. Note: the pop-up menu can be activated by moving the mouse cru
37 4.1 TIME SEARCH Select the time which is going to playback (including the date and the time) and then click button to start playback. If the
38 4.3 BACKUP After click “BACKUP” button, use the drop down list to select “Media Device” which has USB and DVD-RW (in 08CH and 16CH models) two o
39 5 BACKUP PLAYBACK SYSTEM REQUIREMENT CPU: Intel Celeron 1.6G MEMORY: 256MB. VGA: 32MB VGA RESOLUTION: 1024 x 768. OS: Windows XP / 2000 SUGGES
40 B. HDD PLAY Play about all the data from the Hard disk of DVR or perform the specific Time and Event Search to play. Note: Remove the DVR HDD and
41 INTRODUCTION 1.1 FEATURE H.264 hardware video compression Recording rate up to 60 PPS @ D1 Support CMS (Central Management System)
41 B-1. TIME SEARCH Insert search Date and Time and then click to play all the searched film. B-2. EVENT SEARCH It will display all the events
42 Then, select the “StartTime” and “EndTime”. After that, press button to choose the storage destination and press to start reserving. Fina
43 D. File (*.Y42) Play 5.2 USB & LOCAL BACKUP FILE PLAYBACK A. Plug the USB disk into PC or check the local backup folder. If using USB mod
44 C. Open the USB disk located driver letter. (Example E:) or the local backup folder, and pick the file to playback. The backup file will named as t
45 5.3 BACKUP FILE TO AVI A. Please select specific channel to backup. B. During video playback mode please press AVI bottom to start. C
46 6 NETWORK VIEWING & PLAYBACK SYSTEM REQUIREMENT CPU: Intel Celeron 1.6G MEMORY: 256MB. VGA: 32MB VGA RESOLUTION: 1024 x 768. OS: Windows XP /
47 6.2 OPTIONAL MICROSOFT INTERNET EXPLORER SETUP OPTION 1: DISABLE ACTIVEX WARNING A. IE Tools Internet Options Security Cust
48 PTION 2: ADD TO TRUSTED SITES IE Tools Internet Options Security Trusted sites Sites 6.3 LOGIN A. INSTALL ACTIVEX
49 6.4 REMOTE CONTROL LIVE VIEWING A. DVR Configuration Get into DVR network menu. B. PTZ Control PTZ control function panel
50 HDD Select Event Search C. SYSTEM TIME Live viewing mode: The current live viewing time. D. SCREEN FORMAT Switch screen format and click twice to
6 RECORDING RESOLUTION ( Half D1) 720 x 240 (NTSC) / 720 x 288 (PAL) RECORDING RESOLUTION (CIF) 360 x 240 (NTSC) / 360 x 288 (PAL) RECORDING RATE ( D1
51 A. HDD Select User can select HDD1 or HDD2 for playback B. Playback Time User can select the time then press “Time Search” for playback. C. Tim
52 OTHER FUNCTIONS User can use other functions by clicking the left of mouse A. Snapshot: User can save any single pic
53 6.5 CONFIGURE A. System - System Information A-1 SYSTEM INFORMATION SERVER NAME: This name will show on the IP Installer. A-2 NTP Setting NTP SE
54 B-2. USER MANAGEMENT: Add: Input Username and Password and then click on Add/Set to save. Modify: Click on selected User name on User List and the
55 D. NETWORK – IP SETTING D-1. IP ASSIGNMENT DHCP: In Dynamic Host Configuration Protocol (DHCP) mode, DHCP server will get setting done automa
56 E. NETWORK – PPPoE E-1. PPPoE SETTING Click on Enabled to enable ADSL dial function. Username: Username for ADSL account. Password: Password for
57 F. NETWORK / DDNS SETTING Click on Enabled to enable DDNS function. F-1. DYNDNS.ORG DDNS SETTING - DYNDNS.ORG PROVIDER: Select dyndns.org HOSTN
58 F-2. DDNS.CAMNNDS.COM DDNS SETTING – DDNS.CAMDDNS.COM PROVIDER: Select ddns.camddns.com USERNAME: The registered username in DDNS.CAMDDNS.COM. SC
59 Finally, the DVR domain name○5 (http://DVR_GODDNS.ddns.camddns.com) will be shown on the state block. NOTE: 1. If the user selects another prov
60 Mail Server: The IP address of Mail Server (i.e. mail.huntelec.com.tw). SMTP Port: The port of SMTP (known as Simple Mail Transfer Protocol). (De
7 E-MAIL & FTP Yes NETWORK IP Static/ Dynamic/ PPPoE MULTI-REMOTE CLIENT Yes ( 4 Clients at the same time available ) PDA/ CELL PHONE SUPPORT
61 APPENDIX A: RECORDING TIME LAPSE (HOURS) ---- FULL D1-720 x 480 500 GB HDD
62 Half D1- 720x240 500GB HDD
63 CIF-360x240 500 GB HDD
64 APPENDIX B: HDD COMPATIBLE TABLE Brand Model Capacity others SEAGATE STM3250820AS 250 GB 7200 10 ST3250310S
65 APPENDIX C: ERROR MESSAGE LIST ERROR MESSAGE ERROR STATUS & REASON NOTE DISK ACCESS ERROR! H.D.D. Data structure Un-normal. Data does not rec
8 2 HARDWARE OVERVIEW 2.1 FRONT PANEL DVR OPERATION NO. LABEL OPERATION PTZ 1 ○○○○ IR Sensor For Remote Control. 2 LED REC Led Indicator 3
9 2.2 BACK PANEL NO. LABEL OPERATION 1 VIDEO INPUT Video input with BNC connector. 2 AUDIO OUT Audio output 3 AUDIO IN Audio input. 4 MONI
10 2.3 ADVANCED AUTO SWITCH, ZOOM, PTZ, COPY KEY CONTROL & USB INFORMATION AUTO SWITCH : In the split screen mode, use the “QUAD+ ” keys in
Commentaires sur ces manuels