Aposonic A-S1602R20B Manuel d'utilisateur télécharger pdf (Page 73)

- 73 -

 ▲▼(Mouse: Left click)

Press these buttons to select the items.

 ESC (Mouse: Right Click)

Press this button to escape from this screen, and return to Network Setup display.

If the Save dialog is shown, press ENTER to exit and save, ESC (Mouse:

Right Click) to exit without saving.

Following is a brief description for each item and its specific operations:

 Control Port – the control port for remote access. The default value is 67.

Please follow the Text Input method described in Section 4.1 to modify this item.

 Data Port – the data port for remote access. The default value is 68. Please

follow the Text Input method described in Section 4.1 to modify this item.

 HTTP Port – the HTTP (web page) port for remote access. The default value is

80. Please follow the Text Input method described in Section 4.1 to modify this

item.

 WAP Picture Quality – the WAP picture quality if WAP access is supported for

the DVR. Press +/- buttons to change the value.

 Video Stream – network live video stream is the same as “Record” stream, or the

others for dual streaming. If dual streaming is used, the total system recording

rate will be lowered. “Record” means that dual streaming is not used. Press

+/- buttons to change the value. To use dual streaming in I.E. or CMS, the user

must select “Extra” in “Video Stream” in the “Device List” in remote PC (Sec.

9.1). Please note that for High compression ratio in Pre-Camera setup, dual

streaming is always used.

 DVR Name – the “DVR Name” used in the “CMS Server” if CMS Server

(described below) is (to be) connected with the DVR. Please follow the Text

Input method described in Section 4.1

to modify this item.

 CMS Server URL #1-2 – the URL (Uniform Resource Locators) for the CMS

Server #1 and #2. The DVR will connect with up to two CMS servers

automatically once it’s running. Please note that with this feature, the DVR

needs not to be a web server, while the CMS server needs to be a web server.

Please follow the Text Input method described in Section 4.1

to modify these

items.

 IP Filter #1-4 – the IP filters #1-4 for remote access. Only those PCs with IP

addresses matching one of the IP filters can access the DVR remotely. Please

follow the Text Input method described in Section 4.1

to modify these items.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 119 120

Pas de commentaire

Aposonic A-S1602R20B Manuel d'utilisateur Page 73